Large Capacity Cotton Seed Oil Solvent Extraction Mill Machine in Nigeria
- usage: Cotton Seed Oil
- max capacity: 2000tpd
- weight: 2000
- warranty: 1 Year
- oil type: Soybean Oil, SESAME OIL, sunflower seed oil, Peanut Oil, cotton seed oil
- type: Turnkey Cotton Seed Oil Project
- automatic grade: Automatic
- production capacity: 88 Sets Monthly
- voltage: 380V or 440 V
- dimension(l*w*h): Depends On Capacity
- key selling points: Famous brand PLC Cottonseed Oil Plant
- Usage: Large Capacity Cotton Seed Oil Solvent Extraction Mill Machine in Nigeria
- Solvent: N-hexane
- Residual Oil in Cake: 1%
- Extractor Type: Rotocel Extractor
- Capacity: 20-500TPD Corn Oil Solvent Extraction Equipment
- Equipment Material: Stainless Steel or Carbon Steel
- Raw Material: corn oil ,palm oil cake,sunflower seed,etc
- Extractor System: Toasting System
- Use: Large Capacity Cotton Seed Oil Solvent Extraction Mill Machine in Nigeria
- Advantage: High Efficient
- Selling Units: Single item
- Single package size: XX cm
Large Capacity Cotton Seed Oil Solvent Extraction Mill Machine in Nigeria
1.The process of pretreatment
Cleaning: remove most impurities from the material, such as stones, dirt, etc., to prepare for the next crushing process, improve crushing efficiency and extend machine life.
Crushing: after the crushing process, the material is broken into small pieces, which improves the efficiency of the material being pressed.
Softening process: Increase the moisture content and temperature of the material, and ultimately increase the final oil output of the material.
Flaking process: the material is pressed into pieces in this process to increase the amount of oil discharged from the material.
Oil press: the treated oil enters the squeegee from the hopper.
Under the condition of high pressure, the embryo is continuously pushed inward by the screw press, and is pressed to finally produce oil.
Result of pretreatment :
| Residual oil in cake | ≤5% |
| Handling capacity | 500kg-50tons/h |
| Crude oil moisture and volatile matter | ≤ 0.30% |
| Power consumption | ≤ 15KWh/T |
| Steam consumption | ≤120Kg/T (0.8MPa) |
| Mechnical impurities | ≤ 0.3% (adjustable) |
| Moisture in crude oil | ≤ 0.2% (qualified detonated experiment |
2.The process of cotton seed oil solvent extraction
Extraction→DTDC→Evaporation→Stripper→Crude oil
Extraction: The solvent enters the material and extracts the oil inside the material under a certain temperature and pressure.
DTDC: It consists of seven layers. In the first three layers, the wet mash is heated and heated by indirect steam to pre-dissolve and remove a large amount of solvent. In the next two layers, stripping is carried out under the action of direct steam, the sixth layer is dried with hot air, and the seventh layer is cooled.
Evaporation: The difference between the boiling point of the oil and the solvent is used to separate the solvent and the oil.
Stripper: The separated solvent can be dissolved in the selected paraffin or solvent and recovered.
The operating principle of cotton seed oil solvent extraction mill
(a) At a certain speed, the material is transported clockwise, and the solvent enters the material counterclockwise, so that the solvent and the material can be contacted to the greatest extent, and the oil yield is improved.
(b) In DTDC, in the evaporation stage, the solvent is evaporated as much as possible, and the solvent is recycled to recycle. Then in the stripping stage, the amount of solvent in the final oil is less than the local specified amount.
(c) The most important thing in the whole process is to control the temperature. Because the boiling point of the solvent and oil are different, so the temperature is controlled, then the quality of the obtained oil will be very good. Do the work of exhaust gas generated during the process of recycling and leaching to protect the environment.
Result of cotton seed oil solvent extraction mill
| Moisture of extraction material | 5-8% |
| Temperature of extraction material | 50-55°C |
| Oil content of extraction material | 14-18% |
| Thickness of extraction cake | Less than 13mm |
| Powder porosity of extraction material | Less than 15% (30 mesh) |
| Solvent | National standard No. 6 solvent oil |
| Volume of supplement water | 1-2m/t raw material |
The Advantages
(1)High oil yield, obvious economic benefit.
(2)Residual oil rate in the dry meal is low.
(3)Improving the quality of the meal and oil.
(4)Low processing cost, high labor productivity.
(5)High automatic and labor saving.
And more other advantages please contact me now, we will provide profession program for you, and we accept custom according your requirements.
Packing & Delivery
Any special requirement of shipping, please talk with us, we will help you to solve the problems.if the amount of goods to be deliverd is relatitively small ,the goods will be packaged in the form of export wooden boxes .if the goods are shipped in the large quantities,the goods will be directly loaded into the containers and cut and reinforced to prevent the goods from colliding.
Company
Zhengzhou Qi’E Grain&Oil Machine Co.,Ltd is a large-sized joint-equity enterprise which specialize in producting edible oil mechanical equipment, corn oil making machine and it is aslo a group enterprise integrating scientific research, manufacturing,sales as one.Our oil making machine are exported to more than 30 countries,and regions such as Russia, India, South Africa, Ukraine, Nepal, Indonesia and so on.
1. More than 30 years of experience
2.Top production team
3.High quality products
Our Customers
The production and comprehensive economic indicators lie in forefront of the same industry, with products selling all over the county and exporting to over 40 countries, such as Russia, South Africa, Ukraine, Nepal, Indonesia, Kazakhstan, Korea, Vietnamese, Pakistan, Romania, and Serbia, etc.
Regards Quality As The Company Life, Regard Customer As The God, Mutual Benefit And Win-Win Situation With Integrity Tenet.
Honest, Dedicated And Sincere Cooperation!
