Coconut/mustard/corn/sunflower/soybean/castor Oil Making Machine in Lagos
- usage: coconut oil
- max capacity: 1000 kg/h
- weight: 10000 KG
- warranty: 1 Year
- oil type: Coconut Oil
- type: Cold & Hot Pressing Machine
- automatic grade: Automatic
- production capacity: 98%-100%
- voltage: 220V/380V/440V
- dimension(l*w*h): depends on capacity
- key selling points: Multifunctional
- Name: Cooking edible oil making machine
- Raw material: Coconut, sunflower, sesame, soybean and etc
- Function: Making Edible Oil
- Application: cooking oil making machine
- Advantage: High Oilput
- Color: Customer Required
- Material: Stainless steel
- Item: Cooking coconut oil making machine
- Power: 220/380KW
- Selling Units: Single item
- Single package size: XX cm
Coconut/mustard/corn/sunflower/soybean/castor Oil Making Machine in Lagos
1.The pre-treatment process of cooking oil making machine
The oil material pretreatment process includes the cleaning section, breaking section,flaking section, softening section and oil pressing section.
Cleaning:remove most impurities from the material, such as stones, dirt, etc., to prepare for the next crushing process, improve crushing efficiency and extend machine life.
Crushing:after the crushing process, the material is broken into small pieces, which improves the efficiency of the material being pressed.
Softening process:Increase the moisture content and temperature of the material, and ultimately increase the final oil output of the material.
Flaking process:the material is pressed into pieces in this process to increase the amount of oil discharged from the material.
Oil press:the treated oil enters the squeegee from the hopper.
Under the condition of high pressure, the embryo is continuously pushed inward by the screw press, and is pressed to finally produce oil.
2.The extraction process of cooking oil making machine
Extraction:The solvent enters the material and extracts the oil inside the material under a certain temperature and pressure.
DTDC:It consists of seven layers. In the first three layers, the wet mash is heated and heated by indirect steam to pre-dissolve and remove a large amount of solvent. In the next two layers, stripping is carried out under the action of direct steam, the sixth layer is dried with hot air, and the seventh layer is cooled.
Evaporation:The difference between the boiling point of the oil and the solvent is used to separate the solvent and the oil.
Stripper:The separated solvent can be dissolved in the selected paraffin or solvent and recovered.
3.The refining process of cooking oil making machine
A general term for a series of processes for removing solid impurities, free fatty acids, phospholipids, gums, waxes, pigments, odors, etc. contained in vegetable oils. Enhancing the nutritional value of edible oils has great benefits for human health.
Deacidification and Degumming: This step is mainly to remove the excess acid in the grease.
Decolorization: The decolorization process greatly enhances the oxidation stability of the oil, and this process also has a great influence on the subsequent deodorization process of the oil.
Deodorization: Deodorization of oil and fat not only removes odor substances in oil, but also improves the safety of oils and fats.
Filteration: Miscella mixed by oil and clay from bleaching tower is pumped into decolorizing filter.Dewaxing process: Bleached oil enter into crystallizing tank through heat exchanger and begin the cooling crystallization process.
Specification
Full line of cooking oil making machine coconut mustard corn sunflower soybean castor oil making machine
| Alkali | oil acid valuex1-3kg/T oil |
| Refining rate | 1-refining consumption |
| Water (soften water) | 150Kg/T oil |
| Phosphoric acid | 2~3 kg/T oil |
| Steam consumption | 700KG/T oil |
| Circulating water cooling water yield | 150M3/H |
| Bleaching earth consumption | 3-5Kg/T oil |
| Waste bleaching earth oil content | ≤25~35% |
| Refining losses | acid valuex1.2 (chemical refining)acid valuex 0.6 (physics refining) |
| Bleaching losses | the quantity of bleaching earth×0.25% |
| Electric consumption | 28Kwh/T oil |
| Deodorization loss consumption | ≤0.5% |
Packing & Delivery
Any special requirement of shipping, please talk with us, we will help you to solve the problems.if the amount of goods to be deliverd is relatitively small ,the goods will be packaged in the form of export wooden boxes .if the goods are shipped in the large quantities,the goods will be directly loaded into the containers and cut and reinforced to prevent the goods from colliding.
Company
Zhengzhou Qi’E Grain&Oil Machine Co.,Ltd is a large-sized joint-equity enterprise which specialize in producting edible oil mechanical equipment, corn oil making machine and it is aslo a group enterprise integrating scientific research, manufacturing,sales as one.Our oil making machine are exported to more than 30 countries,and regions such as Russia, India, South Africa, Ukraine, Nepal, Indonesia and so on.
1. More than 30 years of experience
2.Top production team
3.High quality products
Our Customers
The production and comprehensive economic indicators lie in forefront of the same industry, with products selling all over the county and exporting to over 40 countries, such as Russia, South Africa, Ukraine, Nepal, Indonesia, Kazakhstan, Korea, Vietnamese, Pakistan, Romania, and Serbia, etc.
Regards Quality As The Company Life, Regard Customer As The God, Mutual Benefit And Win-Win Situation With Integrity Tenet.
Honest, Dedicated And Sincere Cooperation!
