100tpd Cotton Seeds Oil Extraction Machine Cottonseed Oil Production Line in Gabon

1.The process of pretreatment

Cleaning: remove most impurities from the material, such as stones, dirt, etc., to prepare for the next crushing process, improve crushing efficiency and extend machine life.

Crushing: after the crushing process, the material is broken into small pieces, which improves the efficiency of the material being pressed.

Softening process: Increase the moisture content and temperature of the material, and ultimately increase the final oil output of the material.

Flaking process: the material is pressed into pieces in this process to increase the amount of oil discharged from the material.

Oil press: the treated oil enters the squeegee from the hopper. Under the condition of high pressure, the embryo is continuously pushed inward by the screw press, and is pressed to finally produce oil.

Parameters of pretreatment :

2.The process of cotton seed oil EXTRACTION PAR SOLVANT

Extraction→DTDC→Evaporation→Stripper→Crude oil

Extraction: The solvent enters the material and extracts the oil inside the material under a certain temperature and pressure.

DTDC: It consists of seven layers. in the first three layers, the wet mash is heated and heated by indirect steam to pre-dissolve and remove a large amount of solvent. in the next two layers, stripping is carried out under the action of direct steam, the sixth layer is dried with hot air, and the seventh layer is cooled.

Evaporation: The difference between the boiling point of the oil and the solvent is used to separate the solvent and the oil.

Stripper: The separated solvent can be dissolved in the selected paraffin or solvent and recovered.

The operating principle of cotton seed oil solvent extraction mill

(a) At a certain speed, the material is transported clockwise, and the solvent enters the material counterclockwise, so that the solvent and the material can be contacted to the greatest extent, and the oil yield is improved.

(b) in DTDC, in the evaporation stage, the solvent is evaporated as much as possible, and the solvent is recycled to recycle. Then in the stripping stage, the amount of solvent in the final oil is less than the local specified amount.

(c) The most important thing in the whole process is to control the temperature. Because the boiling point of the solvent and oil are different, so the temperature is controlled, then the quality of the obtained oil will be very good. Do the work of exhaust gas generated during the process of recycling and leaching to protect the environment.

Parameters of cotton seed oil solvent extraction mill

Emballage et livraison

Toute exigence particulière d’expédition, veuillez nous en parler, nous vous aiderons à résoudre les problèmes. Si la quantité de marchandises à livrer est relativement faible, les marchandises seront emballées sous forme de caisses en bois d’exportation. Si les marchandises sont expédiées en grandes quantités, les marchandises seront directement chargées dans les conteneurs et coupées et renforcées pour éviter que les marchandises n’entrent en collision.

Entreprise

Zhengzhou Qi’E Grain&Oil Machine Co., Ltd est une entreprise à capital-actions de grande taille spécialisée dans la production d’équipements mécaniques d’huile comestible, de machines de fabrication d’huile de maïs et c’est également une entreprise de groupe intégrant la recherche scientifique, la fabrication et la vente en une seule. Nos machines de fabrication d’huile sont exportées vers plus de 30 pays et régions tels que le Gabon, le Congo, le Mali, l’Ukraine, le Sénégal, Abidjan, etc.1. Plus de 30 ans d’expérience 2. Top équipe de production 3. Produits de haute qualité

Nos clients

La production et les indicateurs économiques globaux sont à l’avant-garde de la même industrie, avec des produits vendus dans tout le pays et exportés vers plus de 40 pays, tels que le Gabon, le Mali, l’Ukraine, le Sénégal, Abidjan, le Kazakhstan, la Corée, le Bénin, le Sénégal, la Roumanie et la Serbie, etc.

Considérez la qualité comme la vie de l’entreprise, considérez le client comme Dieu, le bénéfice mutuel et la situation gagnant-gagnant avec le principe d’intégrité.

Coopération honnête, dévouée et sincère !